WhatsApp
Extenders
Extenders
VIEWCYP SDV-FRX 4K HDR - HDMI over Fiber ReceiverItem Code: CYP SDV-FRXThe SDV-FRX by CYP can receive 4K UHD HDMI, IR, RS-232, USB and Ethernet signals from a compatible transmitter up to 30km away. This product is designed specifically for use with the SDV-FTX Transmitter.
VIEWCYP SDV-FTX 4K HDR HDMI / Displayport over Fiber TransmitterItem Code: CYP SDV-FTXThe SDV-FTX transmits 4K HDMI, IR, RS-232, USB and Ethernet signals up to 30km over a fibre optic cable. This product is specifically designed for use with the SDV-FRX receiver.
VIEWCYP SDV-FTRX SDVoE 4KUHD (6G) HDMI over Fiber TransceiverItem Code: CYP SDV-FTRXThe SDV-FTRX is able to function as either a transmitter or a receiver, either sending or receiving 4K HDMI, DisplayPort, IR, RS-232, USB and Ethernet over distances up to 30km through compatible fibre cables.
VIEWCYP SDV-CTRX SDVoE 4KUHD (6G) HDMI over CAT (10G) TransceiverItem Code: CYP SDV-CTRX SDVoEThe SDV-CTRX is designed to transmit, 4K HDR (6G) signals over a 10G IP Network with almost zero latency. Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation.
VIEWCYP SDV-CS8 SDVoE 10G AV over IP Master Controller and ConfiguratorItem Code: CYP SDV-CS8The SDV-CS8 by CYP is an efficient way of controlling multiple SDVoE extender within the same network, using the WebGUI to configure the transmitters, receivers or transceivers.
VIEWBlustream IP50HD-TX Contractor Series HD Video TransmitterItem Code: IP50HD-TXThe IP50HD-TX is the new upgrade on Blustream's previous Video-over-IP product, and is compatible with the existing ACM200 control module and software. It can operate as matrix distribution when used with a network switch, or as a one-to-one HDMI extender without one. This product is also designed to be used with a compatible receiver.
VIEWBlustream IP50HD-RX Contractor Series HD Video ReceiverItem Code: IP50HD-RXThe IP50HD-TX is the new upgrade on Blustream's previous Video-over-IP product, and is compatible with the existing ACM200 control module and software. It can operate as matrix distribution when used with a network switch, or as a one-to-one HDMI extender without one. This product is also designed to be used with a compatible receiver.
VIEWBlustream IP250UHD-TX IP Multicast UHD Video TransmitterItem Code: IP250UHD-TXCompatible with the pre-existing IP200 products, the IP250UHD-TX is capable of transmitting 4K HDCP 2.2 HDMI signals losslessly up to distances of 100m using HDMI or Ethernet, and even further using its SFP output! The IP250UHDTX also features Dante integration and can be powered locally or via PoE from the network switch.
VIEWBlustream IP250UHD-RX IP Multicast UHD Video Receiver over 1Gb NetworkItem Code: IP250UHD-RXDesigned for use with the IP250UHD-TX but still compatible with the pre-existing IP200 products, the IP250UHD-RX is capable of receiving 4K HDCP 2.2 HDMI signals losslessly up to distances of 100m using HDMI or Ethernet, and even further using its SFP input! The IP250UHD-RX also features Dante integration and can be powered locally or via PoE from the network switch.
VIEWBlustream HEX70USB-KIT HDBaseT™ USB Extender SetItem Code: HEX70USB-KITThe HEX70USB-KIT is Blustream's new HDBaseT extender set that integrates USB 2.0 compatibility, allowing you to connect and control USB Type-B connected devices such as keyboards, webcams or microphones. This kit is capable of sending HDMI signal at 4K UHD up to 40m, or 1080p up to 70m and features PoC (power over cable) meaning that only the transmitter or receiver needs to be connected to a power source.
VIEWCYP AVX-101F-KIT 6G 4K UHD+ HDMI AV over Fiber Transmitter/Receiver KITItem Code: CYP AVX-101F-KITThe AVX-101F-KIT 4K UHD+ HDMI over Fiber KIT is designed for high-quality AV extension with minimal latency thanks to AVX technology. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K@60Hz (4:4:4) HDMI audio/video streams.
VIEWBlustream UEX100E-KIT USB 2.0 HDBaseT™ Extender SetItem Code: UEX100E-KITThe UEX100E-KIT is a USB extender kit utilising HDBaseT™ technology to extend USB 2.0 data, 2ch analogue audio, and control signals up to 100m over a single CAT cable.
