Entreq Triton UK Mains Power Cable

Entreq Triton UK Mains Power Cable

Entreq's Triton line of cables is a culmination of improvements applied to their Challenger and Apollo cables. A true upgrade with infinity and tungsten tech, the Triton is claimed by Entreq to have only one superior, the Olympus line. As with the Argo, the triton does not require a connection to an external grounding system due to the upgraded 4-way quad braided construction.

QSA Fuse Upgrade - Available on all Entreq Mains Cables is the option for an upgraded QSA fuse to replace the existing standard fuse. These QSA fuses have been tried, tested and approved by Per-Olof as an immediate improvement to Entreq's power cables, offering performance that compares to alternative cables at twice the price! Entreq recommends the QSA Orange fuse for the Triton mains power cable as the best price/performance improvement.

10 Unique Characteristics of Entreq Cable Design

1. Separate cable for positive and negative signals to handle magnectic fields in the best way
   This allow Entreq to optimize positive and negative conductors for best performance. Positive and negative conductors have different demands. Many means that they should have same construction for best phase stability, but the benefits with optimize them separately for their job are in our opinion far bigger.
2. Asymmetrical design
   With Entreq's construction, they can choose different metals as well as the dielectric material for positive and negative conductors. The fact Entreq can use different dielectrics mean that they can optimize the polarization effect, so it has so little impact on the signal as possible. Also, Entreq can use different length on the conductors for positive and negative conductors and that allow them to minimize the impact on the signal from the magnetic fields.
3. Positive and negative cables are spun clockwise and anticlockwise respectively
   This together with different length and material on positive and negative conductors/cables give the magnetic fields around the positive and negative cable different shape. This way Entreq can reduce the cross talking betwen the cables and fields.
4. Adapted lengths to minimise the antenna effect
   All cables act as antennas. They both send out and pick up. Some length act as “better” antennas then other lengths. In Entreq's opinion the optimal length for a cable is 4,40 m. Entreq think that length is the worst antenna that pick up less radiation. However, that is not a practical solution to have all cables in that length and also there will be many other negative influences with long cables. Entreq's cables are in step of 0,55 cm lengths, 1.1m, 1.65m, 2.2m and so on.
5. DIC - Dedicated Integrated Contacts
   Entreq make sure that the area and the mass of the contacts area correspond to the cables area. In Entreq's opinion it's very important to keep the signal path as straight and clear as possible. We should avoid bottlenecks and big squares for the signal because it will cause time delays for the signal and the result will be muddy sound. Entreq have also found that it gives big benefits if they use silver for the positive signal and copper for the negative. There are also big differences between solid pins or tubes in the connector. A tube gives better flow for the signal compared with a solid pin. Think of the cable as a Highway. If the access and slip roads are well constructed and in good condition the traffic will flow easy. If it's the opposite, you will get traffic jam and accidents, no matter how good and well-constructed the rest of the road is.
6. Wood in the contact frameworki. Non-magnetic and non-conductive
   All metals are magnetic in one way or another. Even metals/plastic that say they are non-magnetic are “paramagnetic” and have influence on the signal. Wood has no impact on the signal and lets the metal in the connectors signal path work the way you would expect.
7. Only pure copper or/and silver in the signal paths
   No alloys and no metal just for looking good! You never see any metal on a Entreq cable if the metal does not carry signal. Many other brands use big shiny metalparts on the cables for the good looks. But this will be a part of the dielectric and affect the sound quality.
8. Drain wire instead of shielding in order to connet to a pure earth point (External Earth Drains System)
   A common shield of aluminium or copper will also be a part of the dielectric and give undesired results. Instead, Entreq use Infinity treated drain wire of Copper or Silver wich has less affect on the signal, but still protect against radiation. The high pressure treated drainwires (Infinity system) are superior compared with all other kind of wires or shields that Entreq have tested. The Infinity treatment makes the drain work in much higher frequences.
9. EEDS - External Earth Drain System
   This entails the shielding / drain wire not being connected to the device’s negative pole that is the common way. When you do it that way you mix the signal and the pollution just before it enters the device. The result will be that you get it all in the signal/device. With Entreq's EEDS system you keep pollutions and signal separated all the way, from source to receiver. Since the drain wire with the pollutions are connected to another external earth point, (One of Entreq's ground boxes is suggested) the pollutions go to groundbox and the signal go separated and clean to the device. This way, Entreq can drain off the interference/noise that the shielding absorbs to the groundbox outside of the signal paths. A big improvment when kept separated instead of mixed together just before the process in the recieving device.
10. Cotton covering instead of synthetic materials
    The sleeve automatically becomes a part of the dielectric. If using plastic sleeve, you add characteristic to the cables. Some manufacturers want this, but Entreq prefers to add so little features as possible.

About Entreq

Founded in 1999 in Sweden, Entreq is a pioneering company that stands out in the audio industry. Unlike many others, they develop, manufacture, and produce their own products, allowing them to maintain a distinctive approach that prioritises performance and avoids imitating other brands or technical solutions. With complete control over every aspect of production, including constructive materials, design, and connective processes, Entreq ensures its products are unique and focused on delivering exceptional results.

Entreq's two-decade journey has been marked by a series of innovations that have revolutionised the audio industry. While renowned for their ground boxes, they have also introduced groundbreaking products such as Audio USB cables, Audio network cables, network switches for Audio, and DC power cables. Other manufacturers have widely adopted these innovations, solidifying Entreq's position as a leader in the field.

At the core of Entreq's philosophy is a commitment to performance above all else. Their founder, a music lover since birth, recognised the importance of optimising sound quality and has prioritised this goal since purchasing his first stereo in 1973. Entreq believes that performance should take precedence over fancy packaging or expensive marketing, as the enduring impact on sound quality truly matters.

Entreq's early focus on ground purification, introduced in 2007 with their groundbreaking product Tellus, set them apart from the competition. While initially met with scepticism, customers soon experienced significant improvements in sound quality, leading to widespread recognition and appreciation for Entreq's theories about ground and the zero point. Today, their ground purification products, including Tellus and Silver Tellus, continue to be regarded as benchmarks in the industry.

Functionality and performance are paramount to Entreq. Their dedication to delivering exceptional audio experiences is evident when you unpack their products. With years of experience and knowledge, Entreq remains ahead of the curve in development, constantly pushing boundaries to create even more efficient power purification solutions.

Choose Entreq for unparalleled audio performance and discover why their innovative approach and unwavering commitment to excellence have transformed the audio industry.