The QSource is a fanless Linear Power Supply designed specifically for hi-fi audio applications. By providing a stable, clean output of DC power at select voltages, while maintaining extremely low noise levels, the QSource enhances the audio imagery of a sound system by improving sonic articulation, heightening dynamics, and expanding the sound stage.

These multi-award-winning isolators by IsoAcoustics could be a significant step in unlocking the true potential of your setup. With three different models to cover a range of weights, as well as a handy calculator on their website (see below), these isolators will boost clarity and widen your sound stage.

The GAIA isolators are machined stainless steel units that incorporate IsoAcoustics’ patented design to provide a high degree of speaker isolation, while resisting lateral movement and oscillations, to maintain accuracy and alignment with the listening position. Internal reflections from the hard supporting surface are attenuated resulting in greater sound clarity and openness.

The DELOS butcher block from IsoAcoustics decouples the turntable from the supporting surface and dramatically diminishes structural vibrations and resonances, resulting in greater clarity and detail.

The patented IsoAcoustics isolation stand Aperta, which means ‘open’ in Italian, allows for the full three-dimensional soundstage in your music. Speakers float, eliminating reflections from being conducted back into the structure that creates bass smear and resulting in a lack of clarity and openness.

IsoAcoustics engineered a support plate the for Aperta 155 and Aperta 200 bookshelf speaker stands which extend the surface area of your current floor stand or supporting structure to accommodate the Aperta. Double-sided tape is provided to fasten the support plate in place. With this support plate, you can use the brilliance of the Aperta isolation with most existing bookshelf speaker stands. The dimensions for this plate are: 170mm (w) x 210mm (d)

Designed to maintain stable support on your carpet, the optional Carpet Spikes work with the GAIA isolators to provide improved performance on thicker pile carpet and carpet with underpads.

The B&W plate adapts the GAIA I to the Bowers & Wilkins Nautilus and Diamond series speakers. The ball-casters are removed and replaced with the B&W plate which provides a threaded hole for the appropriate stud to screw into.

The B&W D3 plate adaptor replaces the wheels on B&W D3 speakers and provides a threaded hole for the appropriate GAIA stud to screw into.

Fog Lifters significantly reduce RF coupling, whether with the floor, or due to misdirected efforts to isolate cable with stands or clamps that themselves have too much mass and are sources of RF Noise. A few inches or centimeters might not seem important, but as with light coming from a bulb, the energy falls off exponentially. A few inches or centimeters makes a big difference—which translates into a lower noise-floor and less compromise to, and distortion in, attached active circuits.

Nordost’s DC cable uses 2 x 22 AWG, silver-plated, solid-core OFC conductors, which have been arranged in a twisted pair construction. This geometry helps to eliminate noise within the cable. However, to further safeguard from RFI and EMI, the conductors are protected by a braided shield. Additionally, the QSOURCE DC Cable uses Nordost’s Micro Mono-Filament technology in order to increase signal speeds by introducing an air-dielectric to the cable design.