The PUV-3050RX-UA is part of the new generation of HDBaseT 3.0 technology. This receiver is capable of extending uncompressed HDMI 2.0 4K@60 (4:4:4, 8-bit or 4K HDR) video and HD audio, as well as control signals, via a single run of Cat.6a/7 cable over distances of up to 40 meters. Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, and USB 2.0.

The PUV-3050TX-UA is part of the new generation of HDBaseT 3.0 technology. This transmitter is capable of extending uncompressed HDMI 2.0 4K@60 (4:4:4, 8-bit or 4K HDR) video and HD audio, as well as control signals, via a single run of Cat.6a/7 cable over distances of up to 40 meters. Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, and USB 2.0.

​The PUV-3090RX-UEA Receiver is part of a new generation of HDBaseT 3.0 technology and supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input and output over both HDMI and HDBaseT. It is a great solution for extending uncompressed HDMI 2.0 4K@60 (4:4:4, 8-bit) video and HD audio as well as Ethernet (LAN serving) and control via a single run of Cat.6a/7 cable over distances of up to 100 meters. Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, USB 2.0, and 1000BaseT Ethernet.

The PUV-3150TR-UEAO 4K UHD+ HDMI over HDBaseT Transceiver uses HDBaseT 3.0, the newest generation of HDBaseT technology, and is the perfect solution for extending full bandwidth (18Gbps) HDMI 2.0, 4K@60Hz (4:4:4, 8-bit) video with HD audio as well as Ethernet and control via a single run of Cat.6A/7 cable over distances of up to 100 meters.

The QU-16E-4K is a versatile 1 to 16 HDMI distribution amplifier. This product is designed to be used in a 19” rack and will distribute uncompressed HDMI signals up to 4K resolutions. Product Code - QU-16E-4K.

The RE-101 repeater uses v1.3 HDMI specifications, supporting 'Deep Colour' together with High Definition Audio with a high bandwidth up to 225MHz. Product Code - RE-101.

The RE-101-4K22 allows HDMI signals to be extended by a further 5m, supporting resolutions up to 4K/60Hz.

The RE-EDID is designed to allow the adjustment and manipulation of HDMI/DVI EDID information that is provided to a source device by a connected display so that it may output the correct video/audio signal. Product Code - RE-EDID

The RE-PI Power Inserter is used to insert power into a HDMI signal path for self-powering compatible HDMI products. Product Code - RE-PI.

The SDV-CS8 by CYP is an efficient way of controlling multiple SDVoE extender within the same network, using the WebGUI to configure the transmitters, receivers or transceivers.

The SDV-FRX by CYP can receive 4K UHD HDMI, IR, RS-232, USB and Ethernet signals from a compatible transmitter up to 30km away. This product is designed specifically for use with the SDV-FTX Transmitter.