WhatsApp
Need help? Call us on 0800 772 3688 or 0208 905 1555
Prefer email? Contact us via sales@futureshop.co.uk
Atlas Mavros 2 XLR to 2 XLR Audio Cable Pair
As low as €1,576.50
SKU
Atlas Mavros Balanced Audio
5 Years
New
24 hours
Request Price MatchXLR interconnect cable based on the same design objectives and manufacturing techniques developed for Atlas' Asimi range, utilising copper rather than silver conductors. The Mavros XLR is a superb interconnect designed to complement the performance of ‘high-end’ audio systems by achieving maximum signal transfer.
promotional_banner_4
promotional_banner_4
Atlas Mavros 2 XLR to 2 XLR Audio Cable
XLR interconnect cable based on the same design objectives and manufacturing techniques developed for Atlas' Asimi range, utilising copper rather than silver conductors. The Mavros XLR is a superb interconnect designed to complement the performance of ‘high-end’ audio systems by achieving maximum signal transfer.
The Mavros XLR uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique. Cables manufactured with lower grade materials and poor manufacture typically have a coarse, grainy structure which compromises sound quality. In the manufacture of Mavros, Atlas maximise the copper’s conductivity by ensuring that there is typically one grain in approximately 125 metres of conductor, allowing the signal a continuous unbroken path –in practice, the signal has a faster, cleaner and more direct path to follow.
The cable consists of a pair of conductors, each made up from six bundles of 12 multi-conductor wires, plus a thicker centre wire. This in turn is covered by a continuous copper/Mylar™ electrostatic screen with copper shielding braid, ensuring minimal susceptibility to RF interference and noise.
Theoretically, the best dielectric (insulation layer) is air. Conventional dielectric (insulation) materials impose their own signature distortion and loss on the signal. Atlas' technique uses a microporous PTFE (Teflon™) tape, which is wound around the core conductors, then covered again and stabilised using a protective FPE (Flexible PolyEthylene) dielectric. This process maintains the required conductor geometry, and bestows greater manufacturing consistency.
Atlas use cold-weld terminations wherever possible, including their current generation ‘dark Chrome’ XLR connectors. By reducing the number of materials and break points in the signal path, Atlas' objective its to minimise discontinuity and loss in the signal path, resulting in more consistent construction and improved audio performance.
Atlas XLR plugs are wired as follows by default: Pin 1 = Ground; Pin 2 = Hot, Pin 3 = Cold. If you require a different configuration, please contact us.
Features :
- Atlas XLR Plug
- OCC Copper Conductors
- PTFE Dielectric
- Multi-Core + Solid Core Construction
Atlas XLR Plug
The Atlas XLR combines a lightweight aluminium alloy body with precision-fit OFC/OCC connectors and solder-free construction.
Ohno Continuous Casting Copper (OCC Copper)
The Ohno continuous casting method re-heats the extrusion as the molten copper is forced out of the mould and very slowly and gradually draws the grain or crystal down the conductor''s length, creating a ‘single crystal structure.’ Actually, because no copper is 100% pure, there will always be a few boundaries produced by impurities. The frequency of boundaries created are quite insignificant. A typical crystal in a copper conductor drawn to 0.3 mm diam. using the OCC process is 125.00 metres long!
The benefits are obvious, with almost no crystal boundaries, the audio signal is no longer impeded down the copper wire and more information and detail is delivered faithfully to the receiving equipment.
| Copper Purity Comparison (0.3mm Diameter) | ||||
| TPC | OFC | OCC | ||
| Purity | >99.9% | >99.99% | >99.999% | |
| Specific Gravity | 8.75 | 8.926 | 8.938 | |
| Gas Impurities (ppm) | ||||
| O2 | 200~500 | <10 | <5 | |
| H2 | <0.5 | <0.5 | <0.3 | |
| Average Crystal Size (Metre) | 0.007 | 0.02 | 125.00 | |
| Crystals Per Metre | 150 | 50 | 0.008 | |
PTFE Dielectric
PVC (Poly Vinyl Chloride) is cheap to produce and, as such, is the most commonly used insulation in AV cables. However, PVC is the worst quality insulation a Hi-Fi or AV signal can encounter as its high loss causes a significant reduction in signal velocity. PVC is better suited to power cables and should be avoided in Hi-Fi and AV signal cables.
Other dielectrics in common use are Polyethylene, Polypropylene and Polytetrafluoride Epoxy (better known as PTFE (Teflon™) or Teflon,) and the new and unique Atlas (PTFE).
XLPE Dialectric is a form of LDPE (Low Density Polypropylene) formed with cross-link polymers, stable and used extensively on medium voltage cables.
The table below shows the properties of a selection of dielectrics. Though not used as a dielectric in Atlas' cables, PVC is included for comparison purposes.
| Dielectric Material Comparison (0.3mm Diameter) | |||||
| Property | Polyvinyl Chloride (PVC) |
Foamed Polyethylene (PEF) |
Polypropylene (P.P) |
Teflon (FEP or PTFE) |
PTFE |
| Dielectric Constant (@ 50 -106Hz) |
4-8 | 2.3 | 2.25 | 2.1 | 1.3 |
| Dielectric Strength (kV mm-1) |
23-30 | 30-50 | 30-50 | 20-25 | N/A |
| Loss Tangent (% @ 50 - 106Hz) |
8-15 | 0.02-0.05 | 0.02-0.06 (@ 106Hz) |
0.02-0.07 | N/A |
| Volume Resistivity (Ohms.cm @ 20°C) |
1012-15 | >1017 | 6.5x1014 | >1016 | N/A |
| Tensile Strength (Kg mm-2) |
1.0-2.5 | 1.0-2.0 | 3.0-4.0 | 1.9-2.2 | 1.0 |
| Melting Point (°C) |
-130 | 112-120 | 155-160 | 275 | 275 |
| Max. Continuous Operating Temp. (°C) |
60 | 75 | 90 | 200 | 260 |
| Min. Operating Temp. (°C) |
-15 to -40 | <-60 | -5 to -45 | <-60 | -250 |
Multi-Core + Solid Core Construction
A pair of identically matched conductors (one for signal path, the other acts as the return conductor) enclosed within a non-conducting screen.
Specification :
- Construction : Multi-core LF/MF, Solid core HF (1.5mm)
- Material : OCC
- Dielectric : Microporous PTFE (Teflon™)
- Screen : none
- Capacitance : 111.14 pF/m
- Inductance : 0.3412 µH/m
- Resistance : 0.0035 Ohm/m
- VOP : 0.77
- Outside Diameter : 10.22mm
About Atlas Cables 
Atlas Cables are a major producer of interconnects and cables in the United Kingdom of Great Britain. All products are researched, developed and most are assembled in the Atlas purpose built factory in Scotland.
Many of these products are unique and use advanced techniques of production or manufacture in order to bring to the user the very finest quality products. With each new model we continue to push the boundaries of reliability and performance. It's little wonder then, that Atlas Cables have had so many mile-stone advances in the past and that Atlas Cables have secured so many awards in comparative tests against other products.
Specification :
- Construction : Multi-core LF/MF, Solid core HF (1.5mm)
- Material : OCC
- Dielectric : Microporous PTFE (Teflon™)
- Screen : none
- Capacitance : 111.14 pF/m
- Inductance : 0.3412 µH/m
- Resistance : 0.0035 Ohm/m
- VOP : 0.77
- Outside Diameter : 10.22mm
UK Delivery
1. We use Royal Mail 1st Class Services as a Standard Postage Option
Orders received before 4.30pm Monday to Friday (excluding Bank Holidays) are usually dispatched the same day by FIRST CLASS post (unless premium postal or timed courier services are selected), subject to stock availability. Over 98% of our orders are usually delivered the next working day including Saturdays.
Standard delivery is usually within 2-3 working days, although 98% of all orders are delivered the next working day including Saturdays . In extreme cases, such as delivery to the Highlands and Islands, this may take 3 days.
All items are fully insured and come with an invoice from Futureshop.co.uk. We use the Royal Mail for delivery of small packages and DPD or Interlink Express for items that weigh over 2KG. Items over 2KG are fully insured and will usually be delivered within 48 hours of placing your order Monday to Friday subject to stock availability. For International orders, we use FedEx Services where customers have selected this option.
Please note, special orders for non-standard cable lengths or custom-made cables may be subject to longer delivery time-scales. This may vary from manufacturer to manufacturer.
We offer 'Free UK delivery on orders over £99' subject to the following terms & conditions:
- Applies only to orders with £99 or more of items (including VAT at the UK rate), at FutureShop.co.uk
- Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD next working day services which deliver from 9.00am to 6pm within mainland UK (excludes Royal Mail Special Delivery Services and timed next day delivery services by UK Mail).
- Applies only to deliveries to addresses within mainland UK and Northern Ireland addresses. Applies only to orders that are to be delivered to a single Mainland UK delivery address.
- You will not be eligible for free delivery on your order if any items are cancelled or returned for a refund, bringing the total order amount below £99. Where items are returned, the refund due will be the cost of the item less any postage costs.
- We reserve the right to change or discontinue 'Free delivery on orders over £99 promotion at any time.
- FREE DELIVERY FOR ORDERS OVER £99 OFFER DOES NOT APPLY TO TRADE CUSTOMERS.
Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or Interlink Express next working day services which deliver from 9.00am to 6pm within mainland UK.
Free Delivery for orders over £99 excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or Interlink Express.
2. Special Delivery UK - Guaranteed Next Working Day
We have 99.9% of the UK covered With Royal Mail Next Day Special Delivery. We guarantee delivery to most UK addresses by 1pm the next working day. This includes Northern Ireland, Jersey and Guernsey. Some places take longer to deliver to but we still guarantee delivery within three working days by 5.30 PM.
For the Next Day Special Delivery service, orders must be received by futureshop.co.uk by 4.30pm weekdays. Orders after the 4.30pm deadline cannot be guaranteed for same day dispatch.
Please note, Royal Mail Special Delivery for next working day may not be possible where non-standard cable lengths are ordered. If this is the case, the item will be shipped via The Royal Mail Special Delivery service as soon as the cable is custom made.
For orders weighing over 2KG, we reserve the right to ship items using Next Day Pre-Noon Courier Services where Royal Mail Special Delivery option has been selected.
3. Channel Islands & Northern Ireland
We accept orders from all Channel Islands including Alderney, Jersey, Guernsey and Sark. Unless you select a premium service, Items weighing under 2KG are delivered using our standard UK delivery option above. For items weighing over 2KG, a surcharge may be applied for all deliveries to the Channel Islands as well as Northern Ireland.
European Countries
Deliveries to EU member states are subject to 20% VAT. We offer the following shipping services:
- Royal Mail First Class International Untracked Airmail Services - Items are usually delivered within 10 working days.
- Royal Mail First Class International Tracked Airmail Services - Items are usually delivered within 3 to 7 working days.
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 24 to 48 hours. FedEx orders must be received by 3.00pm for next day service to most destinations in Europe
- Federal Express International Economy - Item are usually delivered within 48 to 72 hours
Worldwide - Excluding UK & Europe
Deliveries outside of the EU are not subject to 20% VAT and so the 20% tax on items is automatically deducted when you login or register.
We offer the following shipping services:
- Royal Mail First Class International Untracked Airmail Services - Items are usually delivered within 15 working days.
- Royal Mail First Class International Tracked Airmail - Items are usually delivered within 10-15 working days.
- DHL Express International - Items are usually delivered within 48 hours. DHL orders must be received by 3:30pm in order to ship items the same day, subject to stock availability.
- Federal Express International Priority - Items are usually delivered within 48 hours. FedEx orders must be received by 3.00pm in order to ship items the same day, subject to stock availability.
Where the actual weight of the package significantly exceeds the shipping cost charged on orders, we may write to you for an additional shipping charge. For larger orders, items may be shipped in multiple packets.
Free Premium Cable Burn-In Service: Experience the Power of Nordost VIDAR 2 Machine
We are thrilled to unveil our upgraded cable burn-in service, now featuring the cutting-edge VIDAR 2 burn-in machine. At Future Shop, we strive to provide the best possible experience for our customers, and this enhanced service is designed to unlock the true potential of your high-end cables. Read on to discover the exceptional benefits and advancements offered by the VIDAR 2 machine.
Please note: We are unable to burn-in cables with stripped bare ends or BFA plugs. Cable burn-in occurs after your order has been processed for the selected time period. For custom-length cables, burn-in takes place after termination by the manufacturer or our skilled engineers.
The Nordost VIDAR cable burn-in machine seamlessly combines three vital functions into a single operation:
- Neutralising charges around cables and insulation: The VIDAR 2 effectively dissipates any built-up charges, creating an optimal environment for signal transmission.
- Deep conditioning into the conductor core: With its wide band and profound conditioning capabilities, the machine induces significant changes in signal passage through the metal, resulting in enhanced performance.
- Ultrasonic surface conditioning of conductors: The VIDAR 2 employs ultrasonic technology to refine the conductor surface, further refining the signal quality.
In addition to all the advantages of its predecessor, the VIDAR 2 introduces remarkable improvements, including:
- Complex burn-in signal with wider bandwidth and richer content
- Enhanced directionality for cables
- FOUR burn-in zones - including a new digital zone for USB, Ethernet, and Coaxial (BNC) cables.
Using a proprietary blend of composite and complex signals, the VIDAR 2 ensures comprehensive cable conditioning. The signal consists of ultra-low and ultra-high frequencies, surpassing video frequency ranges. The signal effectively penetrates the core at ultra-low frequencies by oscillating throughout the cable while swiftly traversing the surface at ultra-high frequencies. This transmission methodology counters harmonics and heterodynes between the two complex waveforms, improving signal performance throughout all cable layers.
Furthermore, the circuitry design boasts a unique feature that drives electrons above the conductor into the dielectric or insulation area. This process neutralizes any electrical charges that may impact the signal integrity. With the Nordost VIDAR, we go beyond merely sending ping-pong signals along the cable; we also ensure a balanced signal flow from the centre core to the outer shield in interconnect cables.
What does all this mean for you?
Conditioning your cables with the Nordost VIDAR yields remarkable benefits, including enhanced sound staging, heightened detail reproduction, and a more captivating and musical presentation.
We offer our cable burn-in service as a complimentary offering at the discretion of Future Shop. While we strive to accommodate all burn-in requests for the specified time periods, please understand that during exceptionally busy periods, we may be unable to fulfill all demands due to the limited connections available on the Nordost VIDAR cable conditioning machines.
READ MORE ABOUT THE NORDOST VIDAR 2 BURN-IN TREATMENT
Customer Reviews
5 /5.0 of 1 Reviews
Awesome quality build stunning Dynamics and great value Cables
Mark Adams
13 Feb 2018
Verified Buyer
This cable has made my Music listening pleasure go to a new dimension of pure High class quality making my Speakers and system sounding Dynamic and ultimately wonderfull
I can not recommend these cables highly enough as to making such a true and massive upgrade improvement to my music
I can not recommend these cables highly enough as to making such a true and massive upgrade improvement to my music